PingBrother RSS Bookmark Us

Industrial switching power supply 48V/120W for powering any passive poe device via PingBrother datasheet


 

Industrial switching power supply 48V/120W for powering any passive poe device via PingBrother


High reliability
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With Short-circuit and overload protection
100% full-load burning test
Small bulk design
Installed with EMI filter, minimum wave.
2 years warranty
 

DC output voltage

12V

24V

48V

Output voltage error(Note:2)

±1%

±1%

±1%

Rated output current

10A

5A

2.5A

Output current rage

0-10A

0-5A

0-2.5A

Wave and noise(Note :3)

100mVp-p

120mVp-p

120mVp-p

Inlet stability(Note :4)

±0.3%

±0.2%

±0.2%

Load stability (Note :5)

±0.3%

±0.2%

±0.2%

DC output power

120W

120W

120W

Efficiency

81%

84%

84%

Adjustable range for DC voltage

10.6~13.2V

21~28V

43.2~52.8V

AC input voltage range

88-132VAC/170-264V AC Selected by switch,47-63Hz;240-370VDC

Input current

2.4/115V  1.2A/230A

AC Inrush current

Cold-start current 30A/115V 60A/230V

Leakage current

<1mA/240VAC

Overload protection

105%-150%Type:Foldback:current limiting reset: auto recovery

Over voltage protection

115-135%

Temperature coefficient

±0.03%/℃(0-50℃)

Setup rise hold up time

200ms,50ms,20ms

Vibration

10-500Hz,2G 10min,/1cycle,Period for60min,Each axes

Withstand voltage

Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC

Isolation resistance

Input and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ

Working temperature and humidity

-10℃~+60℃(Refer to output derating curve),20%~90%RH

Store temperature and humidity

-20℃~+85℃。10%~95%RH

Overall dimension

159×98×38mm

Weight

0.45Kgs

Note:
1.The testing condition for the parameter above is :230VAC input, rated load,25℃70% RH.Humidity.
2. Error.include the setting error, line stability and load stability. (Note: 5).
3.Wave test: adopting "A12"double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.
5. Load stability test: the load is from 0% to 100%.

 

 


Related products:

EPIW104P passive poe switch & IP watchdog

more information..

EPIW104 passive poe switch & IP watchdog

more information..

 

 

Mobilrouter Ltd. © 2013 All rights reserved. e-mail: sales@pingbrother.com

 

created by StoneBridge